Dental Series

IQAir's Dental Hg air purifier
  Dental Series** Dental Hg FlexVac**
Application Filtration of a wide variety of airborne pollutants that affect dental offices. Capturing mercury vapor and drill aerosols in the operatory during amalgam drilling. 
Placement Can be placed anywhere in the dental office and cleans air by constant air recirculation. In the operatory - Flexible suction duct is typically placed on patient's chest during drilling. 
Recommended for removal/control of: Odors, dust particles, bacteria, viruses, latex allergens, volatile organic compounds (VOCs), Formaldehyde, Glutaraldehyde, disinfectant vapors, mercury vapor, microorganisms Mercury vapor, drill aerosols, bacteria, viruses
Air intake Air intake arches at base of system Self-supporting suction duct
Suction duct reach N/A Horizontal: Up to 44 feet, 5 inches
Vertical: Up to 6 feet, 4 inches
Air delivery with filters in place Up to 300 CFM  Up to 300 CFM 
Pre-filter GC HyperHEPA Pre-Filter H11 (S)
Purpose: control of coarse, fine & ultrafine dust particles; protection of subsequent filters Media: non-woven glass microfiber HyperHEPA filter, non-off-gassing separators Efficiency: ;:,, 99%    at ;:,, 0.3 microns (EN 1822 HyperHEPA class H11)
Surface area: 32 sq. ft. (3.0 m2)*
Average filter life: approx. 12 ½ months (based on average daily usage of 10h on speed 3)**
Gas & odor filter 11 lbs (5 kg) of media, including 2 cartridges of granular impregnated activated carbon, and two cartridges of activated carbon & impregnated alumina.
Average filter life: approx. 2 years & 5 months (based on average daily usage of 10h on speed 3)**
11 lbs (5 kg) of media, including 4 cartridges of granular impregnated activated carbon to target mercury.
Average filter life: approx. 2 years & 5 months (based on average daily usage of 10h on speed 3)**
Post-filter GC Post-Filter Sleeve Set
Purpose: control of fine & ultrafine particulate matter Media type: electrostatically charged fiber
Surface area: 5.4 sq.ft. (0.5 m2)*
Average filter life: approx.. 2 years & 5 months (based on average daily usage of 10h on speed 3)
Total System Efficiency (certified) ≥ 99% for particles ≥ 0.3 microns (individually tested), ≥ 95% at ≥ 0.003 microns

**Tolerance:± 10%    ** Filter life can vary based on actual usage and pollution levels.

All technical specifications are subject to change without prior notice.

 

IQAir Clean Air Facility

Enter the name of the facility to look up Clean Air facility registration.

Clean air facility

Visit the IQAir Experience Center

Explore IQAir technology through hands-on product demonstrations and interactive educational tools.

Talk to a Solutions Engineer

Call (866) 500-4090 to talk to
a Solutions Engineer.

Talk to an Expert

Connect With IQAir

Sign up for our newsletter