You are here

Cleanroom H13™

  Cleanroom H13™
General Specifications
Power requirements 100-120 V, 50/60 Hz
Energy consumption, 6 fan speeds* 27, 53, 92, 121, 154, 215 Watt; Standby: <1 Watt
Dimensions H 32" x W 15" x D 16" (H 82 x W 38 x D 41 cm)
Weight, system incl. filters 46 lbs. (21 kg)
Air delivery, incl. filters, 6 fan speeds* 45, 90, 150, 200, 250, 360 cfm (75, 150, 260, 340, 430, 610 m³/h)
Sound pressure/power level, 6 fan speeds** LP 25, 36, 44, 50, 54, 59 dB(A); LW 35, 46, 54, 60, 64, 69 dB(A)
Fan motor centrifugal, backward curved, with thermal protector, non-stop use approved
Control panel 4-key touch-pad with 16 character 2-line LCD display
Air intake dual arches at base of system
Air outlet 320° EvenFlow diffuser
Color of main housing / locking arms light gray / green
Housing material non-offgasing, impact-resistant, UV-stabilized ABS
Operating temperature / humidity 41° to 104° F (5° to 40°C) / 5% to 95% non-condensing
Electrical safety certification CSA rated for continuous operation under applicable UL and CSA standards, BSMI
Medical device registration U.S. FDA-registered as a "Class II Medical Device"; Registration No.: 2087558
Performance
Total system efficiency ≥ 99.97% for particles ≥ 0.3 microns (individually tested), ≥ 99.5% at ≥ 0.003 microns
Air delivery (certified) yes (individually tested with all filters installed)
Leak tested yes
EN 1822 classification HEPA class H13 – MPPS efficiency: ≥ 99.95% @ 0.22 microns at airflow rate ≤ 112 cfm (190 m³/h)
HEPA class H12 – MPPS efficiency: ≥ 99.50% @ 0.16 microns at airflow rate ≤ 280 cfm (475 m³/h)
Filter Configuration
Pre-filter CR PreMax™ Filter F8 (XL) A
Purpose: control of coarse and fine particulate matter; protection of subsequent filters
Media: antimicrobial glass microfiber, mini-pleated for high-capacity, non off-gassing separators
Efficiency: ≥ 55% at ≥ 0.3 microns (EN 779 class F8)
Surface area: 75 sq.ft. (7 m²)***
Average filter life: approx. 2 1⁄2 years (based on average daily usage of 10h on speed 3)****
Main particle filter CR HyperHepa® Filter H13 (XL) A
Purpose: control of fine & ultra-fine particulate matter
Media: antimicrobial glass microfiber, medical-grade HyperHEPA® filter, non-offgasing separators
Efficiency: ≥ 99.97% at ≥ 0.3 microns (EN 1822 class H13)
Surface area: 81 sq.ft. (7.5 m²)***
Average filter life: approx. 4 1⁄2 years (based on average daily usage of 10h on speed 3)****
Features
Display languages 4 user-selectable languages: English, French, German, Spanish
Intelligent filter life monitor yes (monitors actual usage of each individual filter), 3 filter life status LEDs
Advanced timer yes (allows programming of operating hours and weekdays)
Advanced fan speed selection yes (allows programming of different fan speeds for 2 different time periods)
Supplied accessories remote control (incl. battery), power cord with plug, anti-tampering toolkit, certificate of performance
Optional accessories FlexVac™ & VM FlexVac™ mobile & wall-mounted source capture kits, InFlow™ & OutFlow™ positive/negative pressure duct kits,Mobility 56 kit, PF40™ coarse dust pre-filter, VMF wall-mount bracket.
* per fan speed measured at 120V, 60Hz; tolerance: ± 10% (± 6 cfm); ** tolerance: ± 3 dB(A); *** tolerance: ± 10% **** filter life can vary based on actual usage and pollution levels.
All technical specifications are subject to change without prior notice.

Talk to an Expert

Talk to an Expert

Call (866) 488-1918 to talk with an IAQ Expert.