You are here

Cleanroom H13 Support



Tech SpecsTech Specs

Replacement FiltersReplacement Filters

Replacement PartsReplacement Parts

Contact UsContact Us


We are proud to cover IQAir Cleanroom, Dental and GCX Series air cleaning systems with a one (1) year limited warranty. If, within 1 year from the original purchase date by the end-user from the authorized IQAir Dealer, this air cleaner or any part thereof (with the exception of filters) is proven to be defective by reason only of faulty workmanship or materials, IQAir North America Inc., will, at their option, repair or replace the faulty air cleaner or part free of charge for labor and materials. The warranty for replaced parts and service work will expire automatically with the termination of the original device's warranty.

This warranty shall not apply to damage caused by misuse, wear and tear, neglect, unauthorized repair, damage caused by installation, adaptation, modification or use in an improper manner or inconsistent with IQAir's operating and maintenance instructions, or to wear or deterioration resulting from environmental conditions or to damage sustained during transit. IQAir North America, Inc. will not be liable under this warranty for any fault or damage arising from defective workmanship, if the product has been serviced, repaired or modified by any person other than IQAir North America, Inc. or if the manufacturer's serial sticker has been removed or tampered with.

IQAir North America, Inc. covers the shipping costs going back to the customer for ground shipping only. Should a faster shipping service be required or if the product needs to be shipped outside the continental United States, additional shipping costs will apply and are the responsibility of the end-user. IQAir North America, Inc. does not extend its warranty nor ship products outside North America. IQAir North America, Inc. will not refund shipping, handling or insurance costs for warranty repairs. Obvious defects must be communicated to the authorized IQAir Dealer within 10 days of the purchase date.

To secure your warranty rights and prevent possible transport damage, all products must be returned in original IQAir packaging. Please keep the original packaging. Alternatively, original IQAir packaging can be ordered, for a nominal fee, from IQAir North America, Inc.

IMPORTANT NOTE: All products you wish to return for service or repair must be accompanied by a Return Authorization Number (RA Number). This number and shipping instructions can be obtained by contacting the IQAir Technical Support Team. The RA Number must be clearly visible on all external packaging. IQAir North America Inc. reserves the right to refuse any shipment received without RA Number and to return the shipment at the original sender's cost.

Click here to register your Cleanroom H13 system.


Congratulations on your purchase of an IQAir Cleanroom H13 Air Purifier. Use the links below to download your User Manual and familiarize yourself with the special features and functions of your IQAir system.

Cleanroom H13

   Cleanroom H13 User Manual 1.1 MB  Download

Technical Specifications

See specifications for your IQAir Cleanroom H13 Air Purifier.

  Cleanroom H13™
General Specifications
Power requirements 100-120 V, 50/60 Hz
Energy consumption, 6 fan speeds* 27, 53, 92, 121, 154, 215 Watt; Standby: <1 Watt
Dimensions H 32" x W 15" x D 16" (H 82 x W 38 x D 41 cm)
Weight, system incl. filters 46 lbs. (21 kg)
Air delivery, incl. filters, 6 fan speeds* 45, 90, 150, 200, 250, 360 cfm (75, 150, 260, 340, 430, 610 m³/h)
Sound pressure/power level, 6 fan speeds** LP 25, 36, 44, 50, 54, 59 dB(A); LW 35, 46, 54, 60, 64, 69 dB(A)
Fan motor centrifugal, backward curved, with thermal protector, non-stop use approved
Control panel 4-key touch-pad with 16 character 2-line LCD display
Air intake dual arches at base of system
Air outlet 320° EvenFlow diffuser
Color of main housing / locking arms light gray / green
Housing material non-offgasing, impact-resistant, UV-stabilized ABS
Operating temperature / humidity 41° to 104° F (5° to 40°C) / 5% to 95% non-condensing
Electrical safety certification CSA rated for continuous operation under applicable UL and CSA standards, BSMI
Medical device registration U.S. FDA-registered as a "Class II Medical Device"; Registration No.: 2087558
Total system efficiency ≥ 99.97% for particles ≥ 0.3 microns (individually tested), ≥ 99.5% at ≥ 0.003 microns
Air delivery (certified) yes (individually tested with all filters installed)
Leak tested yes
EN 1822 classification HEPA class H13 – MPPS efficiency: ≥ 99.95% @ 0.22 microns at airflow rate ≤ 112 cfm (190 m³/h)
HEPA class H12 – MPPS efficiency: ≥ 99.50% @ 0.16 microns at airflow rate ≤ 280 cfm (475 m³/h)
Filter Configuration
Pre-filter CR PreMax™ Filter F8 (XL) A
Purpose: control of coarse and fine particulate matter; protection of subsequent filters
Media: antimicrobial glass microfiber, mini-pleated for high-capacity, non off-gassing separators
Efficiency: ≥ 55% at ≥ 0.3 microns (EN 779 class F8)
Surface area: 75 sq.ft. (7 m²)***
Average filter life: approx. 2 1⁄2 years (based on average daily usage of 10h on speed 3)****
Main particle filter CR HyperHepa® Filter H13 (XL) A
Purpose: control of fine & ultra-fine particulate matter
Media: antimicrobial glass microfiber, medical-grade HyperHEPA® filter, non-offgasing separators
Efficiency: ≥ 99.97% at ≥ 0.3 microns (EN 1822 class H13)
Surface area: 81 sq.ft. (7.5 m²)***
Average filter life: approx. 4 1⁄2 years (based on average daily usage of 10h on speed 3)****
Display languages 4 user-selectable languages: English, French, German, Spanish
Intelligent filter life monitor yes (monitors actual usage of each individual filter), 3 filter life status LEDs
Advanced timer yes (allows programming of operating hours and weekdays)
Advanced fan speed selection yes (allows programming of different fan speeds for 2 different time periods)
Supplied accessories remote control (incl. battery), power cord with plug, anti-tampering toolkit, certificate of performance
Optional accessories FlexVac™ & VM FlexVac™ mobile & wall-mounted source capture kits, InFlow™ & OutFlow™ positive/negative pressure duct kits,Mobility 56 kit, PF40™ coarse dust pre-filter, VMF wall-mount bracket.
* per fan speed measured at 120V, 60Hz; tolerance: ± 10% (± 6 cfm); ** tolerance: ± 3 dB(A); *** tolerance: ± 10% **** filter life can vary based on actual usage and pollution levels.
All technical specifications are subject to change without prior notice.

HyperHEPA H13

(F2 on your control panel)

Eliminates bacteria, viruses and combustion particles from automobiles and smoke, through a nano-fiber structure. Anti-microbial treatment kills microorganisms on contact.

PreMax Pre-filter

(F1 on your control panel)

Eliminates micro-particles such as dust, mold spores and allergens. Anti-microbial treatment kills microorganisms on contact.

Control Panel
Filter Life Monitor

HyperHEPA® H13 Filter


HyperHEPA H13 Filter

$289 CAD

PreMax Pre-Filter (F8 XL)


PreMax Pre-Filter

$149 CAD

Replacement Parts

Remote Control

6 speeds, battery included
(for all Residential Room Systems)

Remote Control

$13.50 CAD

Power Cord

2.5 meter, 2-prong, grey
(for all Residential Room Systems)

Power Cord

$6.75 CAD

Contact Us

Please complete the form below and a service expert will contact you shortly to help with your IQAir product needs.

* Required Fields

Individual    Company
Please enter your first name.
Please enter your last name.
Please enter your email address in the following format:
Please enter your phone number in the following format: xxx-xxx-xxxx
Please select your product from the list above.
Please enter a message.

All information is treated confidentially and will not be supplied to third parties.

Talk to an Expert

Talk to an Expert

Call (866) 488-1918 to talk with an IAQ Expert.